2026世界杯足彩怎么买?2026美加墨世界杯足彩玩法说明与购买指南

TubesT - LC Junction Process
  • Software Download
  • Manual
  • Video
  • Tutorial
TubesT - LC Junction Process

Ⅰ. Overview

 

When processing channel steel and angle steel parts, the following situations may occur:

① The toolpath cuts into the parts' wall thickness, making it impossible to discharge slag during cutting and resulting in incomplete cut-through.

② For parts with features at the edges, the kerfs of the generated toolpaths do not align, so the parts cannot fall off after cutting.

To address these issues, TubesT has introduced the LC Junction Process function.

 

Ⅱ. Function Description

 

1. Permission-related Information

 

(1) Version requirement: TubesT 2025V3.9 and later versions.

Starting from TubesT 2026V1.3, the original LC Thick-Cut Processing has been changed to LC Juntion Process, and R corner strategy has been added under Case 1.

(2) Permission restriction:

This function is supported by TubesT Small Tube, TubesT 2-, TubesT Professional, TubesT Professional with Small Tube Package, TubesT Steel Structure, and TubesT Steel Section.

 

 

2. Funtion Location

 

Click Curve Tools → LC Junction Process to enter the processing page.

 

 

3. Notice

 

LC Juntion Process is recommended to be used as the last step of toolpath preprocessing before nesting.

That is, first perform the required operations on the imported parts, such as Modify Dead Zone Model, Technique (Compensation, Lead Line, Microjoint, etc., and Weld Seam Compensation, and then use the LC Juntion Process function.

 

4. LC Tailor Check

 

In versions after TubesT 25V3.9, LC tailor check is automatically performed before automatic nesting and exporting files.

Notice: If you want to perform LC tailor check at other times, you can configure it in Auto Process. For configuration steps, refer to the tutorial: TubesT - Auto Process (Steel Structure Edition).

 

5. Steps

 

①Click Curve Tools → LC Juntion Process.

② Set the processing parameters and application scope.

Notice: TubesT will automatically determine whether the thick-cut toolpath of the part hits "waste material" or the "part". ① If it hits waste material, further processing strategies can be set. ② If it hits part, only the part shape can be modified, and you do not need to perform extra configuration.

 

 

Ⅲ. Parameter Definitions

 

1. Processing Settings

 

Tailor Thickness: When the drawing is not standard, the cutting deviates, or a safe cutting distance is desired, the LC Tailor Thickness function can be used to offset the toolpath to ensure that no over tailor occurs. This is the distance d between the red toolpath and the blue toolpath in the figure below.

 

 

2. Scenario Adaptation

 

Case 1: The laser beam hits against "waste material". In this case, you need to set a processing strategy.

Strategy: You can choose whether to retain the shape drawn on the part drawing.

        • Keep shape: TubseT do not change the original part shape.

 

 

        • Not keep shape: TubesT will modify the shape of the original part drawing.

 

 

R corner strategy: You can choose to flatten the R corner or retain the original R corner. When you have relatively high requirements for the splice welding effect and needs fill welding, it is recommended to select Flatten R corner.

 

  Flatten R corner
Retain R Corner
Channel Steel Example
Angle Steel Example

 

Precut Hole: It can be used to provide slag discharge space for the over tailor toolpath and to flatten the R corner. It comes in U-shaped and L-shaped types. Only when the over tailor toolpath does not retain shape and the R corner is retained, a precut hole does not need to be generated.

 

 

Case 2: The laser beam hits against "part". This can only be avoided by modifying the part shape. The software will handle it automatically, and you do not need to configure a strategy.

 

 

3. Application

Application Scope: You can set the processing scope yourself to change the part toolpaths within that scope.

 

 

Ⅳ. FAQs

 

1. Differences and Applicable Scenarios Between LC Junction Process and Weld Seam Compensation

 

(1) Weld Seam Compensation has the same effect as Maximum Cutting (Less Material) in Dead Zone Model Modification. When users have low requirements for part shape, it can quickly ensure the splicing effect and improve subsequent processing efficiency.

(2) LC Junction Process can satisfy users with high requirements for part shape and accurately achieve the drawing effect.

(3) When users use Technique (Compensation, Lead Line, Microjoint, Weld Seam Compensation etc.) and Toolpath Processing operations, the toolpath after X-direction compensation may exhibit over tailor plate cutting, which then prevents slag discharge during cutting and results in incomplete cut-through. LC Junction Process can solve the corresponding problem.

Notice: Before LC Junction Process, ensure that weld seam compensation and other compensation configurations have been completed.

 

2.Why do the toolpaths generated by LC Junction Process have small kink segments?

 

Because the tailor thickness value has been set.

 

 

 

TubesT - LC Junction Process 144view

Ⅰ. Overview

 

When processing channel steel and angle steel parts, the following situations may occur:

① The toolpath cuts into the parts' wall thickness, making it impossible to discharge slag during cutting and resulting in incomplete cut-through.

② For parts with features at the edges, the kerfs of the generated toolpaths do not align, so the parts cannot fall off after cutting.

To address these issues, TubesT has introduced the LC Junction Process function.

 

Ⅱ. Function Description

 

1. Permission-related Information

 

(1) Version requirement: TubesT 2025V3.9 and later versions.

Starting from TubesT 2026V1.3, the original LC Thick-Cut Processing has been changed to LC Juntion Process, and R corner strategy has been added under Case 1.

(2) Permission restriction:

This function is supported by TubesT Small Tube, TubesT 2-, TubesT Professional, TubesT Professional with Small Tube Package, TubesT Steel Structure, and TubesT Steel Section.

 

 

2. Funtion Location

 

Click Curve Tools → LC Junction Process to enter the processing page.

 

 

3. Notice

 

LC Juntion Process is recommended to be used as the last step of toolpath preprocessing before nesting.

That is, first perform the required operations on the imported parts, such as Modify Dead Zone Model, Technique (Compensation, Lead Line, Microjoint, etc., and Weld Seam Compensation, and then use the LC Juntion Process function.

 

4. LC Tailor Check

 

In versions after TubesT 25V3.9, LC tailor check is automatically performed before automatic nesting and exporting files.

Notice: If you want to perform LC tailor check at other times, you can configure it in Auto Process. For configuration steps, refer to the tutorial: TubesT - Auto Process (Steel Structure Edition).

 

5. Steps

 

①Click Curve Tools → LC Juntion Process.

② Set the processing parameters and application scope.

Notice: TubesT will automatically determine whether the thick-cut toolpath of the part hits "waste material" or the "part". ① If it hits waste material, further processing strategies can be set. ② If it hits part, only the part shape can be modified, and you do not need to perform extra configuration.

 

 

Ⅲ. Parameter Definitions

 

1. Processing Settings

 

Tailor Thickness: When the drawing is not standard, the cutting deviates, or a safe cutting distance is desired, the LC Tailor Thickness function can be used to offset the toolpath to ensure that no over tailor occurs. This is the distance d between the red toolpath and the blue toolpath in the figure below.

 

 

2. Scenario Adaptation

 

Case 1: The laser beam hits against "waste material". In this case, you need to set a processing strategy.

Strategy: You can choose whether to retain the shape drawn on the part drawing.

        • Keep shape: TubseT do not change the original part shape.

 

 

        • Not keep shape: TubesT will modify the shape of the original part drawing.

 

 

R corner strategy: You can choose to flatten the R corner or retain the original R corner. When you have relatively high requirements for the splice welding effect and needs fill welding, it is recommended to select Flatten R corner.

 

  Flatten R corner
Retain R Corner
Channel Steel Example
Angle Steel Example

 

Precut Hole: It can be used to provide slag discharge space for the over tailor toolpath and to flatten the R corner. It comes in U-shaped and L-shaped types. Only when the over tailor toolpath does not retain shape and the R corner is retained, a precut hole does not need to be generated.

 

 

Case 2: The laser beam hits against "part". This can only be avoided by modifying the part shape. The software will handle it automatically, and you do not need to configure a strategy.

 

 

3. Application

Application Scope: You can set the processing scope yourself to change the part toolpaths within that scope.

 

 

Ⅳ. FAQs

 

1. Differences and Applicable Scenarios Between LC Junction Process and Weld Seam Compensation

 

(1) Weld Seam Compensation has the same effect as Maximum Cutting (Less Material) in Dead Zone Model Modification. When users have low requirements for part shape, it can quickly ensure the splicing effect and improve subsequent processing efficiency.

(2) LC Junction Process can satisfy users with high requirements for part shape and accurately achieve the drawing effect.

(3) When users use Technique (Compensation, Lead Line, Microjoint, Weld Seam Compensation etc.) and Toolpath Processing operations, the toolpath after X-direction compensation may exhibit over tailor plate cutting, which then prevents slag discharge during cutting and results in incomplete cut-through. LC Junction Process can solve the corresponding problem.

Notice: Before LC Junction Process, ensure that weld seam compensation and other compensation configurations have been completed.

 

2.Why do the toolpaths generated by LC Junction Process have small kink segments?

 

Because the tailor thickness value has been set.

 

 

 

Baidu
sogou