2D Cutting
Tube Cutting
3D Cutting
Intelligent Welding
Intelligent Cutting Head
Industrial Automation
Industrial Software
Combination
Combination
Combination
Controller
2D Cutting Head
Tube Cutting Head
3D Cutting Head
Consumables
Servo
Industrial 4.0
If you want to generate identifiers on the part surface for subsequent marking or inkjet printing, you can check the Identifier when drawing parts in TubesT.
Starting from 2026V2.5, Marking in TubeDraw when drawing branch pipe parts has been renamed to Identifier. For tutorials on versions prior to 2026V2.5, please refer to Part Drawing - Marking.
To use the above functions, please check your version first. If you are using an earlier version, you can click here to upgrade the nesting software.
Step 1: When drawing a branch pipe, check Identifier. The branch pipe will then have the identifier attribute, and the branch pipe will turn blue.
Step 2: Select the Type of marking, which is the processing method for the identifier. You can choose either Marking or Inkjet Printing. If processing is not required, you can select Not Cut.
The table below shows the effects after selecting different identifier types.
| Identifier Type | Diagram |
| Marking | ![]() |
| Inkjet Printing | ![]() |
| Not Cut |
Notice: If Display the 'Not Cut' Indicator is checked in Display, the toolpath will be displayed in the non-processing layer (white). |
If you want to generate identifiers on the part surface for subsequent marking or inkjet printing, you can check the Identifier when drawing parts in TubesT.
Starting from 2026V2.5, Marking in TubeDraw when drawing branch pipe parts has been renamed to Identifier. For tutorials on versions prior to 2026V2.5, please refer to Part Drawing - Marking.
To use the above functions, please check your version first. If you are using an earlier version, you can click here to upgrade the nesting software.
Step 1: When drawing a branch pipe, check Identifier. The branch pipe will then have the identifier attribute, and the branch pipe will turn blue.
Step 2: Select the Type of marking, which is the processing method for the identifier. You can choose either Marking or Inkjet Printing. If processing is not required, you can select Not Cut.
The table below shows the effects after selecting different identifier types.
| Identifier Type | Diagram |
| Marking | ![]() |
| Inkjet Printing | ![]() |
| Not Cut |
Notice: If Display the 'Not Cut' Indicator is checked in Display, the toolpath will be displayed in the non-processing layer (white). |